China Conical Ball Mill Manufactures with ISO
-
Payment
-
Origin
China Mainland
-
Minimum Order
1
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Jinfeng Gold Mining Machinery is one of the best conical ball mill manufacturers in China, equipped with good factory, welcome to wholesale conical ball mill made in China from us.
Product features
large diameter double row self-aligning roller bearings are adopted instead of sliding bearing on common mill. Convenient maintenance and long service life, greatly reducing the friction and making the energy consumption reduced by 15-30%. It has high efficiency and can start up easily.
A conical structure which reinforces the ball mill is adopted near the discharging end, and it is more important that it makes the steel balls classified naturally. Small diameters of the steel balls which will mill material to be smaller near the discharging opening.
By adopting an integral steel under-frame and high installation accuracy, it’s easy for you to operate and install with a short cycle.
By adopting cylinder feeder instead of combined feeder, there is no inertial impact. Thus, the mill runs stably. When the mill is closed down to repair, the time of maintenance will be reduced and the efficiency will be improved.
Note for Selection
While selecting, the customer should specify the rotating direction and discharging way of the ball mill.
The bearing type can be changed as required by the customer.
Notes:Previous common ball mills usually use the combined feeder. Its matched classifiers adopt the mode of charging at the bottom of the tank. The material centralized in the bunker under the feeder. There is no special requirement for rotating direction of the spiral classifier. Both the new types of conical ball mill and rolling bearing ball mill adopt cylinder feeder without inertial impact;their matching classifiers adopt a sand scraper to scrape the ore pulp out from the side of the tank,which is directly discharged to the cylinder feeder via the chute.The flow and process are simple and convenient,but spiral direction of he classifier must be contrary to rotating direction of the mill.
Technical parameters of GZM series conical ball mill
Model | Standards | (r/min) Revolution of the sh ell | (t) | (mm) | (mm) | (t/h) Output | Cooperate Motor | (mm) | (kg) Weight | |
Model | (kw) Power | |||||||||
GZM0912 | F900×1200 | 41.6 | 0.9 | 0.074~0.3 | 0~15 | 0.3~0.8 | Y180L-8 | 11 | 3355×1800×1400 | 3900 |
GZM0918 | F900×1800 | 41.6 | 1.5 | 0.074~0.3 | 0~15 | 0.4~1.1 | Y180L-8 | 15 | 3955×1800×1400 | 5430 |
GZM0921 | F900×2100 | 41.6 | 1.7 | 0.074~0.3 | 0~15 | 0.5~1.3 | Y180L-8 | 15 | 4255×1800×1400 | 5660 |
GZM0933 | F900×3300 | 41.6 | 2.8 | 0.074~0.3 | 0~15 | 0.85~2.2 | Y225M-8 | 30 | 5500×1800×1400 | 7380 |
GZM1220 | F1200×2000 | 34.8 | 3.2 | 0.074~0.3 | 0~25 | 1.3~3.3 | Y225M-8 | 22 | 4085×2140×1760 | 8202 |
GZM1224 | F1200×2400 | 34.8 | 4.0 | 0.074~0.3 | 0~25 | 1.6~4.1 | Y250M-8 | 37 | 4485×2140×1760 | 9103 |
GZM1228 | F1200×2800 | 34.8 | 4.8 | 0.074~0.3 | 0~25 | 2.2~5.6 | Y280S-8 | 37 | 4885×2140×1760 | 9481 |
GZM1232 | F1200×3200 | 34.8 | 5.5 | 0.074~0.3 | 0~25 | 2.0~5.2 | Y280M-8 | 45 | 5285×2140×1760 | 10586 |
GZM1238 | F1200×3800 | 34.8 | 6.8 | 0.074~0.3 | 0~25 | 2.2~5.6 | Y280M-8 | 45 | 5885×2140×1760 | 11336 |
GZM1245 | F1200×4500 | 34.8 | 7.0 | 0.074~0.3 | 0~25 | 3.0~7.5 | Y315S-8 | 55 | 6485×2140×1760 | 12420 |
GZM1324 | F1300×2400 | 30.2 | 4.2 | 0.074~0.3 | 0~25 | 1.3~3.3 | Y250M-8 | 30 | 5035×2370×1880 | 9782 |
GZM1328 | F1300×2800 | 30.2 | 5.0 | 0.074~0.3 | 0~25 | 1.6~4.0 | Y280M-8 | 45 | 5435×2370×1880 | 10838 |
GZM1334 | F1300×3400 | 30.2 | 6.0 | 0.074~0.3 | 0~25 | 1.9~4.8 | Y315S-8 | 55 | 6035×2370×1880 | 12156 |
GZM1520 | F1500×2000 | 30.7 | 6.0 | 0.074~0.3 | 0~25 | 1.8~4.5 | Y280M-8 | 45 | 5650×2930×2060 | 11037 |
GZM1524 | F1500×2400 | 30.7 | 6.3 | 0.074~0.3 | 0~25 | 2.1~5.2 | Y315S-8 | 55 | 5650×2930×2060 | 12600 |
Model | Standards | (r/min) Revolution of the shell | (t) | (mm) | (mm) | (t/h) Output | Cooperate Motor | (mm) Dimension (L×W×H) | (kg) Weight | |
Model | (kw) Power | |||||||||
GZM1526 | F1500×2600 | 30.7 | 6.6 | 0.074~0.3 | 0~25 | 2.6~6.0 | YR280S-8 | 55 | 6250×2930×2060 | 13223 |
GZM1530 | F1500×3000 | 30.7 | 7.4 | 0.074~0.3 | 0~25 | 2.9~6.7 | Y315M-8 | 75 | 6850×2930×2060 | 13968 |
GZM1535 | F1500×3500 | 30.7 | 9.0 | 0.074~0.3 | 0~25 | 3.5~8.0 | JR117-8 | 80 | 7450×2930×2060 | 16137 |
GZM1538 | F1500×3800 | 30.7 | 9.8 | 0.074~0.3 | 0~25 | 3.8~8.6 | JR125-8 | 95 | 7750×2930×2060 | 17420 |
GZM1545 | F1500×4500 | 30.7 | 11.2 | 0.074~0.3 | 0~25 | 4.4~9.9 | JR126-8 | 110 | 8350×2930×2060 | 18500 |
GZM1557 | F1500×5700 | 30.7 | 14.2 | 0.074~0.3 | 0~25 | 5.6~13 | JR127-8 | 130 | 9550×2930×2060 | 20833 |
GZM1565 | F1500×6500 | 30.7 | 16.4 | 0.074~0.3 | 0~25 | 6.5~15 | JR128-8 | 155 | 10450×2930×2060 | 21950 |
GZM1836 | F1800×3600 | 25.2 | 12.5 | 0.074~0.3 | 0~25 | 2.5~11 | JR128-8 | 155 | 8400×3800×2330 | 33940 |
GZM1840 | F1830×4000 | 25.2 | 14.0 | 0.074~0.3 | 0~25 | 2.8~13 | JR128-8 | 155 | 8800×3800×2330 | 34990 |
GZM1842 | F1830×4200 | 25.2 | 15.0 | 0.074~0.3 | 0~25 | 3.0~14 | JR128-8 | 155 | 9000×3800×2330 | 35840 |
GZM1848 | F1830×4800 | 25.2 | 17.0 | 0.074~0.3 | 0~25 | 3.5~16 | JR136-8 | 180 | 9600×3800×2330 | 37260 |
GZM1856 | F1830×5600 | 25.2 | 20.0 | 0.074~0.3 | 0~25 | 4.0~18 | JR136-8 | 180 | 10400×3800×2330 | 39280 |
GZM1864 | F1830×6400 | 25.2 | 23.0 | 0.074~0.3 | 0~25 | 4.6~21 | JR137-8 | 210 | 11200×3800×2330 | 41840 |
GZM1870 | F1500×2600 | 25.2 | 25.3 | 0.074~0.3 | 0~25 | 4.3~23 | JR138-8 | 245 | 11800×3800×2330 | 45767 |
GZM2127 | F2100×2700 | 23.8 | 15.0 | 0.074~0.5 | 0~25 | 3.5~25 | JR128-8 | 155 | 7455×3920×2485 | 32871 |
GZM2130 | F2100×3000 | 23.8 | 17.0 | 0.074~0.5 | 0~25 | 3.9~27.5 | JR128-8 | 155 | 7776×3920×2485 | 34859 |
GZM2135 | F2100×3500 | 23.8 | 20.0 | 0.074~0.5 | 0~25 | 4.5~33 | JR136-8 | 180 | 8200×3920×2485 | 37138 |
GZM2140 | F2100×4000 | 23.8 | 23.0 | 0.074~0.5 | 0~25 | 5.0~38 | JR137-8 | 210 | 8793×3920×2485 | 39000 |
GZM2145 | F2100×4500 | 23.8 | 26.0 | 0.074~0.5 | 0~25 | 6.5~43 | JR137-8 | 245 | 9306×3920×2485 | 43875 |
GZM2150 | F2100×5000 | 23.8 | 28.0 | 0.074~0.5 | 0~25 | 7.0~45 | JR138-8 | 245 | 9901×3920×2485 | 46117 |
GZM2158 | F2100×5800 | 21.7 | 30.0 | 0.074~0.5 | 0~25 | 8.0~50 | JR1410-8 | 280 | 10099×3920×2485 | 55486 |
GZM2733 | F2700×3300 | 21.7 | 32.0 | 0.074~0.5 | 0~25 | 12~92 | JR157-8 | 320 | 9010×5410×3150 | 73315 |
GZM2736 | F2700×3600 | 21.7 | 34.0 | 0.074~0.5 | 0~25 | 12.5~98 | JR158-8 | 380 | 9314×5410×3150 | 75410 |
GZM2742 | F2700×4200 | 21.7 | 38.0F | 0.074~0.5 | 0~25 | 15~118 | JR1510-8 | 475 | 10035×5410×3150 | 80647 |
GZM3236 | F3200×3600 | 18.5 | 37.5 | 0.074~0.6 | 0~25 | 18~135 | TDMK630-32 | 630 | 11600×7200×5700 | 139000 |
GZM3290 | F3200×9000 | 18.5 | 93.69 | 0.074~0.5 | 0~25 | 28~217 | TDMK1400-36 | 1400 | 17800×7300×5700 | 171000 |
GZM3645 | F3600×4500 | 17.3 | 61.8 | 0.074~0.5 | 0~25 | 23~197 | TDMK1250-36 | 1250 | 15010×7230×6323 | 152000 |
GZM3690 | F3600×9000 | 17.3 | 123.5 | 0.074~0.5 | 0~25 | 31~345 | TDMK1600-36 | 1600 | 19710×7330×6323 | 227000 |
GZM4070 | F4000×7000 | 16.7 | 115.4 | 0.074~0.5 | 0~25 | 30~320 | TDMK2000-36 | 2000 | 18100×7890×6730 | 350000 |
- Gold Ore Flotation Machine&Sf Flotation Equipment 1 Pieces / (Min. Order)
- Energy Saving Mining Ball Mill (MQGg) 1 Pieces / (Min. Order)
- Rolling Bearing Energy-saving Ball Mill for Processing gold ores 1 Pieces / (Min. Order)
- High Quality Wet Grinding Ball Mill 1 Pieces / (Min. Order)
- Low Price Cement Grinding Mill Equipment For Raw Material Grinding 1 Pieces / (Min. Order)